https://smarthomecontroller.app/blog Setting up, fixing and automating Tuya and Smart Life smart home devices. en-us https://smarthomecontroller.app/blog/connect-2-4-ghz-smart-plugs-bulbs-mesh-dual-band-wifi https://smarthomecontroller.app/blog/connect-2-4-ghz-smart-plugs-bulbs-mesh-dual-band-wifi Mon, 05 Oct 2026 12:00:00 GMT Most Tuya/Smart Life smart plugs and smart bulbs only join 2.4 GHz Wi‑Fi because it’s simpler and reaches farther than 5 GHz. To connect on a mesh or dual‑band router, put your phone on the 2.4 GHz SSID (or an IoT/guest 2.4 network), then run pairing in Smart Home Controller. If you see “can’t connect,” temporarily disable band steering or split SSIDs during setup. https://smarthomecontroller.app/blog/merkury-smart-bulb-plug-setup-pairing-mode-wifi-fixes https://smarthomecontroller.app/blog/merkury-smart-bulb-plug-setup-pairing-mode-wifi-fixes Mon, 05 Oct 2026 12:00:00 GMT In the Merkury Smart app, put your Merkury bulb or plug into pairing mode (bulb usually flashes, plug’s indicator blinks), then join a 2.4 GHz Wi‑Fi network (avoid captive portals). If setup fails with errors like “Device not responding” or “Failed to add,” re-enter pairing mode, confirm WPA2 security, and try the alternate AP/EZ pairing method in the app. https://smarthomecontroller.app/blog/organize-smart-home-devices-by-room-naming-system https://smarthomecontroller.app/blog/organize-smart-home-devices-by-room-naming-system Mon, 05 Oct 2026 12:00:00 GMT In Smart Home Controller, put every Tuya or Smart Life device into the correct room, then rename it using a room-first, device-second pattern (like “Kitchen Ceiling” or “Bedroom Lamp”). Avoid duplicates (“Lamp”, “Light”), and keep names short and consistent so voice commands don’t grab the wrong device and automations stay readable. https://smarthomecontroller.app/blog/reset-tuya-smart-plug-without-losing-automations https://smarthomecontroller.app/blog/reset-tuya-smart-plug-without-losing-automations Mon, 05 Oct 2026 12:00:00 GMT To reset a Tuya/Smart Life smart plug without blowing up automations, first note which schedules reference the plug, then remove it from the app, reset it (hold the button until the LED blinks), and re-pair on 2.4 GHz Wi‑Fi. After it imports into Smart Home Controller, open each automation and re-select the plug if you see missing-device actions. https://smarthomecontroller.app/blog/smart-bulb-turns-on-after-power-outage-stop-it https://smarthomecontroller.app/blog/smart-bulb-turns-on-after-power-outage-stop-it Mon, 05 Oct 2026 12:00:00 GMT Most smart bulbs turn on after a power outage because their “power-on state” defaults to ON, the wall switch (or smart relay) fully cut power so the bulb couldn’t remember its last state, or an automation fired when power returned. Fix it by setting the bulb’s power-restore behavior to “Last state” or “Off,” keeping the switch always on, and checking Smart Life/Tuya schedules and sunrise/sunset automations. https://smarthomecontroller.app/blog/control-all-smart-lights-at-once-iphone https://smarthomecontroller.app/blog/control-all-smart-lights-at-once-iphone Sun, 04 Oct 2026 12:00:00 GMT In Smart Home Controller on your iPhone, sign in with your Smart Life account (to import existing devices) or pair Tuya lights on 2.4 GHz Wi‑Fi, then organize lights into rooms. From the dashboard, use the room controls to turn every light in that room on or off with 1 tap, or set an all-lights schedule for a single “all off” moment. https://smarthomecontroller.app/blog/feit-electric-smart-bulb-setup-pairing-reset-blinking-fix https://smarthomecontroller.app/blog/feit-electric-smart-bulb-setup-pairing-reset-blinking-fix Sun, 04 Oct 2026 12:00:00 GMT To set up a Feit Electric smart bulb, put it in pairing mode (it usually blinks rapidly), then add it in Smart Home Controller after signing into your Smart Life account (or pair Tuya-compatible bulbs on 2.4 GHz Wi‑Fi). If it won’t pair or blinks nonstop, power-cycle to reset, then retry pairing mode. https://smarthomecontroller.app/blog/set-smart-lights-turn-on-at-sunset-and-off-at-bedtime https://smarthomecontroller.app/blog/set-smart-lights-turn-on-at-sunset-and-off-at-bedtime Sun, 04 Oct 2026 12:00:00 GMT In Smart Home Controller, create 2 automations for your light (bulb, plug, or switch). Automation 1 trigger: Sunrise/Sunset, set it to Sunset, then action: Turn On. Automation 2 trigger: Schedule, set your bedtime time (and days), then action: Turn Off. If it doesn’t run, check days, time zone, and sunrise/sunset settings. https://smarthomecontroller.app/blog/smart-life-vs-tuya-smart-differences-device-compatibility https://smarthomecontroller.app/blog/smart-life-vs-tuya-smart-differences-device-compatibility Sun, 04 Oct 2026 12:00:00 GMT Smart Life and Tuya Smart are both used for Tuya-platform devices, but your devices are tied to the account and app you paired them with. If you want to switch, you typically remove (or reset) the device, then re-pair it in the other app on 2.4 GHz Wi‑Fi. Smart Life logins can import into Smart Home Controller. https://smarthomecontroller.app/blog/tuya-smart-bulb-not-connecting-pairing-modes-fixes https://smarthomecontroller.app/blog/tuya-smart-bulb-not-connecting-pairing-modes-fixes Sun, 04 Oct 2026 12:00:00 GMT Most “Tuya smart bulb not connecting” problems come down to 2 things, the bulb is in the wrong pairing mode, or your iPhone is on 5 GHz Wi‑Fi. Reset the bulb until it blinks, then in Smart Home Controller tap Add Device and use 2.4 GHz. If it still fails, reset again until the blink pattern changes. https://smarthomecontroller.app/blog/smart-life-integration-guide https://smarthomecontroller.app/blog/smart-life-integration-guide Thu, 18 Jan 2024 12:00:00 GMT Set up your devices in the Smart Life app first, then open Smart Home Controller, go to Settings, then Integrations, choose Smart Life and sign in with the same Smart Life account. Your devices import automatically and you can assign them to rooms and automations. https://smarthomecontroller.app/blog/tuya-device-pairing-guide https://smarthomecontroller.app/blog/tuya-device-pairing-guide Mon, 15 Jan 2024 12:00:00 GMT Put the Tuya device in pairing mode (a fast-blinking LED), open Smart Home Controller, go to Devices, tap +, choose Add Tuya Device, pick your 2.4 GHz Wi-Fi network and enter the password. The app finds the device in about 30-60 seconds; then name it and assign it to a room.